2013-01-29 15:27:55 -
HLM identifies strong Tantalum grades up to 192 ppm Ta205 over 14 meters on the Pakeagama Rare Metals Project in Northwestern Ontario
Sudbury, Ontario CANADA, January 29, 2013 /FSC/ - Houston Lake Mining Inc. (HLM - TSX Venture)is a mining exploration company which is actively exploring for the rare metals lithium, cesium, tantalum, and rubidium by currently focusing on its 100% owned and optioned Pakeagama Rare Metals Project in northwestern Ontario, Canada. HLM is pleased to announce some of the results from its 2012 Channel Sample Program on the Pakeagama Lake pegmatite, located at the 1,792 hectare (4,424 acre) Pakeagama Rare Metals Project property.
In September 2012, Peter J. Vanstone, P.Geo. the qualified person for the project, conducted a 91 sample
channel sampling program on the Pakeagama Lake pegmatite in order to confirm historical results and to add additional channel samples while further sampling by distinct geologic zones. In addition to the high grade lithium oxide results up to 4.74 Li20 over 15 meters reported by HLM January 10, 2013, the program has also identified tantalum (Ta), niobium (Nb), and tin (Sn) oxides in a distinct pegmatite zone as discussed below:
1) Central Intermediate Zone (CIZ)
CHANNEL ORIENTATION LENGTH Ta205 Nb205 Sn02
SAMPLE (DEGREES) (M) (ppm) (ppm) (ppm)
PAK-12-CH001R 226 14.00 192 115 131
including 6.00 270 179 123
also 1.00 387 262 143
PAK-12-CH007R 222 6.00 83 32 129
including 1.00 125 89 74
PAK-12-CH019 213 11.60 87 34 127
3.10 125 42 172
This Central Intermediate Zone (CIZ) is located in the upper portions of the pegmatite. It is in contact with both the Upper Intermediate Zone and Upper Wall Zone, and persists to the southeast edge of the outcrop where it is believed the pegmatite continues under the till cover. Channel 19 is located in the central portion of the exposed CIZ where the zone consists of predominantly grey K-feldspar with minor lithian mica + quartz alteration. To the southeast the alteration process whereby the K-feldspar is altered to a mica+quartz mixture was sampled by Channel 7R. The samples from this channel consisted of similarly sized fragments of randomly oriented K-feldspar with varying degrees of mica+quartz alteration. In the adjoining area to the northeast of Channel 7R, the alteration process whereby the K-feldspars are more or less completely replaced with a lithian mica + quartz mixture is visible. In this area veinlets and patches of lepidolite occur. This altered zone, as sampled by Channel 1, contains the highest tantalum grades found to date in the exposed pegmatite.
When considering the CIZ as outlined in Table 1, the total distance between channels 19 and 1 is approximately 35m. Overall, this zone has an exposed surficial expression of approximately 100m in length and remains open to both the southeast and northwest.
The Pakeagama Lake pegmatite does not currently have a resource, however the mineralogy of the CIZ and the presence of lepidolite is similar to the CIZ found in the Tanco pegmatite and was the main tantalum zone at the Tanco mine. The Tanco pegmatite is located southwest of Pakeagama Lake in southeastern Manitoba and is currently a tantalum mineral concentrate producer.
"In addition to the high-grade lithium results up to 4.74 Li20 over 15 meters encountered and reported recently, these strong tantalum grades from the program entrench the Pakeagama Lake pegmatite as a leading exploration target for rare metals. Furthermore, HLM anxiously anticipates the pending final results of analysis for the element of Rubidium that our pegmatite also contains. With the data we have collected thus far, a Phase I, 1,000m diamond drilling program has been independently recommended to the Company in order to test the resulting targets," said Trevor R. Walker, President of HLM.
All scientific and technical information in this release has been reviewed and approved by Peter J. Vanstone, P.Geo. who is the qualified person under the definitions established by National Instrument 43-101. Under HLM's QA/QC procedures, channels are cut with a motorized circular diamond saw, and are 4 cm wide and 10 cm deep. The channels are oriented perpendicular to the strike of the pegmatite internal mineralogical zones and are cut continuously across the zones. The samples are removed using a hammer and chisel. The length of a channel is determined by the width of the pegmatite zone. Offset channels are cut where deemed appropriate. Sample lengths typically are 1 metre but can be less depending on zone mineralogy and boundaries. Samples are described, placed into a poly sample bag with a numbered sample tag and then shipped to the assay lab for quantitative analysis for select elements. All HLM samples are currently being assayed by Activation Laboratories Ltd. with all samples being delivered to their Thunder Bay facility. Sample blanks along with tantalum, lithium, rubidium and cesium standard samples are routinely inserted into the sample stream in accordance with industry best practices. At the completion of each program, approximately 10% of the channel sample pulps are submitted to a secondary ISO certified laboratory for assay verification.
About Houston Lake Mining Inc.
HLM is a mining exploration company that is actively exploring for the rare metals lithium, cesium, tantalum, and rubidium by currently focusing on its 100% owned and optioned Pakeagama Rare Metals Project in northwestern Ontario, Canada. HLM has a total of 63,019,056 common shares issued and outstanding. For additional information, please visit www.houstonlakemining.com.
Company Contact Information
Henry J. Kloepper, CEO
2736 Belisle Drive
Val Caron, ON.
P3N 1B3 CANADA
T. +001 705.897.7622
F. +001 705.897.7618
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address future production, reserve potential, exploration drilling, exploitation activities and events or developments that the Company expects are forward-looking statements. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward looking statements include market prices, exploitation and exploration successes, continued availability of capital and financing, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and those actual results or developments may differ materially from those projected in the forward-looking statements. For more information on the Company, Investors should review the Company's registered filings what are available at www.sedar.com.
To view this press release as a web page, click onto the link below:
Source: Houston Lake Mining Inc. (TSX-V: HLM) (Pink Sheets: HLKMF) www.houstonlakemining.com
Maximum News Dissemination by FSCwire. www.fscwire.compm
Ta205 over 14 meters on the Pakeagama Rare Metals Project in Northwestern Ontario